MH314C Plate Roll
Technical data
Installed power: 10 HP
Top roll diameter: 11.4”
Lower roll diameter: 10.3”
Side rolls diameter: 8.3”
Capacity
Working length: 122”
Max. rolling thickness: 9/16”
Max. pre-bend thickness: 1/2”
The max performances are referred to shells of diameter equal or larger than 3 times the top roll diameter and with material with a yield point 38,000 PSI.
Click HERE for additional information on the MH314C Plate roll...
ERMAKSAN Photo Gallery
ERMAKSAN has been manufacturing metal working machinery since 1965; they make annually approximately 3000 machines in their fully modernized and equipped 861000 ft2 factory. ERMAKSAN is today the largest sheet metal working machinery factory under one roof in Europe. ...
Pictures and video on MG 32520Z test-rolling 10' plate
You don't get to see this every day... MG32520Z is rolling a 10' plate.
Here are some stats on this monster:- Weight: almost 400 tons / 800,000 lbs
- Machine capacity: 250 mm / 10", able to bend plate 250 mm / 10" thick on total length of 3,200 mm / 126".
- Top roll diameter: 1,400 mm / 55"
- Side rolls diameter: 1,200 mm / 47"
- Total length of machine: 13,700 mm / 45'
- Height: 7,700 mm / 25.3'
- Width: 7,100 mm / 23.3'
- Weight of top roll: 53 tons / 116,600 lbs
- Side rolls (2): 47 tons each / 103,400 lbs
- 17 trucks needed for the transport from Italy to Spain
Click HERE for video on test-rolling
BENDMAK 2-, 3-, 4-rolls
CYL-ST 3-roll Asymmetrical Plate Bending Machine
CYL 3-roll Asymmetrical Plate Bending Machine
CY4R-M 4-roll
...
