Ermak EKN variable rake hydraulic corner notchers have a strong frame with its statically and dynamically rigid steel table and top beam material. T-slot top table allows precise cuttings and there is no need for alignment for different sheet thicknesses for automatic blade gap adjustment. EKN series perform frequent cutting via 4 hydraulic hold-down cylinders.
STANDARD FEATURES
- Cutting angle adjustment from 30 degrees to 140 degrees by hand wheel
- Statically and dynamically rigid T-slot table and top beam material
- Automatic blade gap adjustment
- Long life-time and easy operation
- Removable foot pedal
- Adjustable stroke
- Plexiglas protections
- Fast adjustable cutting angles by rulers and set squares
- 4 piece hold-down cylinders to fix the sheet during cutting
- Scrap box
- Maintenance free Hoerbiger hydraulic system
Cutting capacity
| Mild steel ST 37: |
0.24" (from 60 degrees to 140 degrees) |
| Mild steel ST37: |
0.16" (from 30 degrees to 59 degrees) |
| Stainless steel: |
0.118" (from 60 degrees to 140 degrees) |
| Stainless steel: |
0.1" (from 30 degrees to 59 degrees) |
Technical information
| Main motor: |
5.4 HP |
| Working pressure: |
200 bar |
| Oil capacity: |
12.7 gallons |
| Table dimension: |
45.3” x 24" |
| Cutting angle: |
30 degree – 140 degree |
| Blade length: |
7.88” x 7.88” |
| Max. stroke: |
30/min. |
Dimensions
| Length: |
45.2” |
| Width: |
45.5” |
| Height: |
56.7” |
| Weight: |
41.3” |
...
